Garage Door Guide Rail Roll Forming Machine Introduction
This light steel frame machine is used to make various guide rails. A guide rail is a device or mechanism to direct products, vehicles or other objects through a channel, conveyor, roadway or rail system. Our guide rail machine can make guide rails for garage door, roll shutter door, elevator or lift shafts and so on. If you need light gauge steel framing machines, please contact us.
Features and Advantages of Garage Door Guide Rail Roll Forming Machine
Roll Shutter Door Roll Forming line, specially designed for forming rolling shutter door panel, under mass-production.
Production speed: 20/30/40/50/60 m/min optional.
Working with non-stop flying cut and full automatically stacking system, Max speed of the line can reach 60 m/min.
Cassette type platform quick change Machine base for multi-profile purposes is available for choice.
Certified with Multi-Patents; CE Certified, EUROPEAN quality standard
Most of hot & popular profiles models, we have ready machines in stock for prompt delivery.
Garage Door Guide Rail Roll Forming Machine Working Flow
Coil Charging Car (optional)
Decoiler (passive/auto)
Front Shear(optional)
Feeding and Guiding Table
Filming Covering (optional)
Roll Forming System
Post-Cutting to length (Hydraulic/Motor)
Output Manual Supporter/Stackmaster(optional)
Suitable Coil Sheet Material
Suitable material: Cold/hot Rolled Steel, Galvanized Steel
Thickness: 0.8-1.3/1.0-1.6/1.5-2.0 (mm)
Yield Strength: 230-300 (MPa)
Width: as profile requests
The cold roll forming machine is a machine for continuously processing a metal sheet of a coil, a strip, or the like by a multi-pass forming roller which is sequentially arranged to form a plastic processing process for a specific section profile.
Production of Roof & Wall panel roll forming equipment from Hangzhou Roll Forming Technology Co., Ltd is dignified and elegant, beautiful and novel, and the appearance of level off, even ripple, high utilization rate.
